Current: Winbo Mall > Help > Maker Help > Maker Help

Help Center

  • 1、 How to manage models in the maker stores

  •    Step 1: Upload the model.


       Step 2: please find out “Management” under “Maker Store”.


    1.png

     

      Step 3: You may manage the models by putting on/off shelf, deleting or editing.


    2.png

    This help resolve your problem?

    Submit

  • 2、 How to classify maker models?

  •    Step 1: Register a Winbo mall membership account.


       Step 2: Apply to become a maker.


       Step 3: Go to “Maker management” → “Model” → “Uploading”.


    1.png


       Step 4: Please select category according to your model type.


    2.png

    This help resolve your problem?

    Submit

  • 3、 Steps to upload models for makers

  •    Step 1: Register a member account with WINBO Mall.


       Step 2: Apply to be a maker.


       Step 3: Go to “Maker management” → “Model” → “Uploading”. 

     

    图片1.png


       Step 4: After clicking on “Uploading”, you will come to a page where you need to put down model information before uploading. 


    图片2.png


       Uploading photos for the model: Please pay attention to the photos’ size as well as the format in order to have the best display result.

     

    图片3.png


       Click on “Submit” to upload models. Before submitting, you may preview the upload result.


    图片4.png

    This help resolve your problem?

    Submit

  • 4、 How to upload free models?

  •    Step 1: Register a Winbo mall membership account.

     

       Step 2: Apply to be a maker. 

     

       Step 3: Go to “Maker management” → “Model” → “Uploading”. 

     

    1.png

      

       Step 4: Go to “Selling mode” and check “Free”, then you may upload free models.


    2.png

    This help resolve your problem?

    Submit

  • 5、 How to edit the uploaded models if they can’t be approved by WINBO website?

  •    WINBO website will notify you for any problems resulting in failure of models uploading. You just need to follow its instructions to re-upload models. 

    This help resolve your problem?

    Submit

  • 6、 Why the model can’t be displayed immediately on the store after uploading?

  •    Before displaying on the store, WINBO website needs to conduct review on the models first and it may take some time. Please wait patiently.

    This help resolve your problem?

    Submit

  • 7、 How to upload a combination of multiple models?

  •    Step 1: Register a Winbo mall membership account.

     

       Step 2: Apply to become a maker.

     

       Step 3: Go to “Maker management” → “Model” → “Uploading”. 


    1.png


       Step 4: Please select the model file that you need to upload under the "Model File". You may need to choose the exact uploading method depending on the file size. You may upload several models in one time. 


    2.png

    This help resolve your problem?

    Submit

  • 8、 How to distinguish between free models and charged models?

  •    Please log on the WINBO Mall home page first. Under the “3D Models”, all 3D models are free of charge within “Free 3D Models”.


    1.png


       All 3D models under “3D Printing” are charged. 


    2.png

    This help resolve your problem?

    Submit

  • 9、 How to upload charged models?

  •    Step 1: Register a Winbo mall membership account.


       Step 2: Apply to be a maker. 


       Step 3: Go to “Maker management” → “Model” → “Uploading”.

               

    1.png

             

       Step 4: Go to “Selling mode” and check “Pay”, then you may upload charged models. Don’t forget the unit price for the charged model.


    2.png

    This help resolve your problem?

    Submit

  • 10、 How to upload big models?

  •    Step 1: Register a Winbo mall membership account.


       Step 2: Apply to be a maker. 


       Step 3: Go to “Maker management” → “Model” → “Uploading”. 


    1.png


       Step 4: Under “Model files”, please check “Large files”.


    2.png


       Step 5: Please “Browse” the model file that you need to upload and click on “Upload”.


    3.png

    This help resolve your problem?

    Submit

  • 11、 About the patent of uploaded models

  •    Before uploading any models, a Winbo Mall member needs to make sure the models’ legality: the final property is owned by him. If there are copyright issues, illegal uploading or usurping concerning the uploading models on Winbo Mall, the models uploaders shall take the full responsibility and Winbo Mall shall not be responsible.

    This help resolve your problem?

    Submit

  • 12、 Where are the uploaded models showed?

  •    There are three places where you may show uploaded models: 3D Printing, 3D Models and Maker Store. You may divide the uploaded models into charged and free according to different sale types. If the uploaded models are charged, you may show them on 3D Printing. If the uploaded models are free, you may show them on 3D Models. Also you may show them on your own Maker Store.

    This help resolve your problem?

    Submit

  • 13、 How to delete uploaded models?

  •    Step 1: please sign in your Winbo mall member account.


    1.png


       Step 2: Go to “Maker management” → “Model” → “Management”.


    2.png


       Step 3: Please select the models that you need to delete. You may delete one or more in one time.


    3.png

    This help resolve your problem?

    Submit

  • 14、 How to recommend the models in my store?

  •    Step 1: upload the models.


       Step 2: Go to “Maker management” → “Maker” → “Store Decoration”.


    1.png


       Step 3: Entering page “Store Decoration”, please click on “Add a new section”.


    2.png


       Step 4: Please click on  "adding columns" to fill out the name and quantity, which you want to recommend. 


    3.png


       Step 5: Pls click on “Recommendation” in new section.


    4.png


       Step 6: Pls click on “Add”, choose the model and click on “Recommendation”.


    5.png


       Step 7: Pls click on “Editor”,You will find the model that you recommended, click on “confirm”.


    6.png


       Step 8: You will find your model in your home page of the store. 


    7.png

    This help resolve your problem?

    Submit

  • 15、 Can the uploaded models be edited again?

  •    Yes, the uploaded models can be edited again.


       Step 1: Go to “Maker management”→“Model”→ “Management”.


    1.png


       Step 2: Please find the models that you need to reedit and click” Edit”.


    2.png

    This help resolve your problem?

    Submit

  • 16、 Personalized Domain Settings for Maker Stores

  •    Step 1: Please sign in Winbo Mall account first.


    图片1.png


       Step 2: Click “ Users” under “My Winbo”. 


    图片2.png


       Step 3: In the same column of “Shop by category”, please find” Maker’s Settings” under “Maker management”.


    图片3.png


       Step 4: Fill in personalized domain for your maker store in the “Basic information”. Domain, like your certificate, should be easy to remember and understand.


    图片4.png

    This help resolve your problem?

    Submit

  • 17、 How to change the maker’s photo or other basic Information?

  •    Step 1: Please sign in WINBO Mall member account first.


    1.png


       Step 2: Please click on the “Users” under “My Winbo”.


    2.png


       Step 3: Under the left side “Shop by category”, fine out “Maker’s settings” under “Maker Management”. 


    3.png


       Step 4: Please fill in the maker’s basic information. The red star marked places are required items. Please double check before save. 


    4.png


       Step 5: The portrait is your symbol. To upload the portrait photo, there are two methods. One is “Local Upload” and the other one is “Photographic”. You may upload the one as you want. 


    5.png


       Step 6: Here we take “Local Upload” for an example. Select the photo you need to upload and adjust the size. Click on the “Save” and it is OK. 


    6.png


       Step 7: Completing the above information and uploading the picture, please double check before clicking on the “Submit”.


    7.png

    This help resolve your problem?

    Submit

  • 18、 Process of maker store decoration

  •    Step 1: Apply to become a maker;


       Step 2: Upload the model;


       Step 3: Sign in Winbo member account first. Please click on the “Users” under "My Winbo".


    1.png


       Step 4: on the left categories, find out “Store Decoration” under “Maker Store” section. 


    2.png


       Step 5: Come to the page "Store Decoration", you may find that store decoration is like managing a website. As below shows, there are some places which can be edited. You may upload product photos, designs and so on. Here it is like an advertisement for the store.


    3.png


       Step 6: After you clicking on the "Editor", here comes the section for modification. Click on “Click add more pictures”. In order to beautify the store, please give priority to the best picture size.


    4.png


       Step 7: Please click on the place where there is no pictures as shown below. 


    5.png


       Step 8: Please click on “Upload image” again. It takes long time to decorate the store. Therefore, please take patience to do it. 


    6.png


       Step 9: Please find out the pictures you want to upload. Click and upload.


    7.png


       Step 10: You can upload the desired image and click on the “Insert”.


    8.png


       Step 11: Even though you could only upload no more than 5 pictures here, you may display your advertisement bravely. After finishing uploading, please remember to click on “OK”. 


    9.png


       Step 12: Please click on the blue section “Add a new section”.


    10.png


       Step 13: Please fill in the section information that you need to add. The section can be divided into two categories: one is "Products section" and the other is “Advertising section (custom section)”. Please pay attention to the numbers which may have influence on product recommendation for the store. You may select the exact category according to your specific requirements. 


    11.png

     

       Step 14: If you select "Products section", you will come to the section as shown below. Click on the "Recommendation" and you can recommend what you want.


    12.png


       Step 15: Please click on the "Add" and check the recommended products, click “Recommendation” again.


    13.png


       Step 16: Please click on the "Editor" again and you can see the recommended products. After that, click on OK.


    14.png


       Step 17: Finally, you will see the recommended products shown on home page of the store.


    15.png


       Step 18: Meanwhile, if you select "Advertising section (custom section)" as shown below, please click on the "Content".


    16.png

     

       Step 19: After Clicking on the "Content", customize your store content, and finally click OK to complete.


    17.png

    This help resolve your problem?

    Submit

  • 19、 What to do if you forget the user name or password?

  •    1 Forget the user name


       If you forget the user name, you may contact Winbo Mall’s online service please contact Winbo Store Online Service: TradeManager, QQ or Skype.


       2 Steps to retrieve your password.


        图片1.png

      

       Step 1: Log on Winbo Mall home page, and click on the "Forgot your user ID or password?”.


    图片2.png


       Step 2: In the forwarding page, please fill in the related information that can help you to retrieve your password.


    图片3.png


       Step 3: Winbo Mall system will send out an e-mail automatically "Change Password Settings". Click on the link to the page to set password.


    图片4.png


       Step 4: according to the jump page information, fill in a new password and click "Submit" to retrieve your user name and the password.


    图片5.png

    This help resolve your problem?

    Submit

  • 20、 Whether it is free of charge to become a maker in Winbo Mall?

  •    Yes, it is. Winbo Mall is a free, open platform to service makers all around the world. Makers include 3D printing professionals, 3D printing hobbyists, 3D designers and so on.

    This help resolve your problem?

    Submit